So, you just bought that new Plasma TV. Now you might be forced to make a decision - do I go for glamour and mount this thing on my lounge wall or go the traditional route with a TV stand. Each option has its dangers and its rewards, so right here we are going to look at the pros and cons of each.
The Useless Glory of Wall Mounting
Does not it just make sense in case your TV is only some inches deep to mount that sucker proper above the fireplace for all to see? Perhaps, but consider what it takes to wall mount a flat screen.
1. Buy a wall mounting kit from a Plasma Dealer.
2. Make sure said kit suits your TV. For those who do not do this, it is going to either cost you time or plaster.
3. Locate the studs behind the wall. Once more, if you miss this, you will be the proud proprietor of a smashed TV set. The screws should go into studs, not just sheet rock.
4. Just remember to measure and stage everything BEFORE you screw any holes. This can be very hard to vary later. In truth, I dare say you will not do it a second time, but reasonably you'll live with a slightly-croocked mounted Plasma or you'll just quit and purchase a TV stand.
5. Now, actually screw the mount into the wall.
6. Cut a gap behind the TV to run wires by and one other hole wherever the wires need to come out. Fish the wires by the holes using both a snake software or a stretched wire hanger. Sure, I am severe about this step. If you are going to mount it, mainly for looks, do not depart wiring showing. It just won't be value it.
7. Connect the pieces of the mounting system that affix to the TV. Then, gently set the tv into the mount bracket. It's your decision another individual there with you for this.
8. Test everything. Be sure that the TV works, the mount is secure, and the tv mounting nyc is secure within the mount.
The Blessed Simplicity of the TV Stand
Effectively, that was interesting. Now, let's review the steps concerned in organising a TV stand.
1. Purchase a TV stand that most closely fits the placement at which you wish to show your TV. Be sure to take note of the burden and depth of the television, in addition to any equipment you may attach to it.
2. Have it delivered and setup. Certain, you can drive it home yourself and put it collectively, however you have better things to do in life - like watch your big Plasma-screen TV.
3. Place your television on the stand. Drop wires behind it and fasten them to the sockets or external models as needed.
4. Go get some wings. It is time for the game.
The Useless Glory of Wall Mounting
Does not it just make sense in case your TV is only some inches deep to mount that sucker proper above the fireplace for all to see? Perhaps, but consider what it takes to wall mount a flat screen.
1. Buy a wall mounting kit from a Plasma Dealer.
2. Make sure said kit suits your TV. For those who do not do this, it is going to either cost you time or plaster.
3. Locate the studs behind the wall. Once more, if you miss this, you will be the proud proprietor of a smashed TV set. The screws should go into studs, not just sheet rock.
4. Just remember to measure and stage everything BEFORE you screw any holes. This can be very hard to vary later. In truth, I dare say you will not do it a second time, but reasonably you'll live with a slightly-croocked mounted Plasma or you'll just quit and purchase a TV stand.
5. Now, actually screw the mount into the wall.
6. Cut a gap behind the TV to run wires by and one other hole wherever the wires need to come out. Fish the wires by the holes using both a snake software or a stretched wire hanger. Sure, I am severe about this step. If you are going to mount it, mainly for looks, do not depart wiring showing. It just won't be value it.
7. Connect the pieces of the mounting system that affix to the TV. Then, gently set the tv into the mount bracket. It's your decision another individual there with you for this.
8. Test everything. Be sure that the TV works, the mount is secure, and the tv mounting nyc is secure within the mount.
The Blessed Simplicity of the TV Stand
Effectively, that was interesting. Now, let's review the steps concerned in organising a TV stand.
1. Purchase a TV stand that most closely fits the placement at which you wish to show your TV. Be sure to take note of the burden and depth of the television, in addition to any equipment you may attach to it.
2. Have it delivered and setup. Certain, you can drive it home yourself and put it collectively, however you have better things to do in life - like watch your big Plasma-screen TV.
3. Place your television on the stand. Drop wires behind it and fasten them to the sockets or external models as needed.
4. Go get some wings. It is time for the game.